Loading ...RIP
CCNP BSCI(642-901) Quick Learning
Thursday, October 22nd, 2009The following Quick Learning Modules are focused on a specific lesson or topic from the current BSCI curriculum.
This content is only accessible by Registered Users. If you have not yet registered, you will be prompted to register, before proceeding to access this content.
Introducing the OSPF Protocol
Upon completing this lesson, you should be able to:
Tags: 642-901, [...]
RIPv2 – Things to Remember
Friday, July 31st, 20091. The RIP process operates from UDP port 520.
2. The metric used by RIP is hop count, with 1 signifying a directly connected network of the advertising router and 16 signifying an unreachable network.
3. RIP sends periodic updates every 30 seconds minus a small random variable that prevents the updates of neighboring routers from becoming [...]
R&S Quick Notes – IGP’s
Friday, June 12th, 2009RIP
Know your filters: Offset-list, Distribute-lists, distance command.
With filters read carefully: “between 25 & 45″ or “from 25 to 45″.
Know your prefix-lists or alternatively using ACL’s instead.
“passive interface” command, ONLY stops the sending of updates out the interface. Interface will still receive and process those updates. Passive interfaces will still be advertised in [...]
Redistribution Lab1 – Redistributing into RIP and OSPF
Tuesday, March 31st, 2009【Lab Objectives】
1. To master the re-release configuration of OSPF and RIP.
2. To master the E1 and E2 types of route to OSPF.
【Lab Topology】
Tags: Lab, OSPF, Redistribution, RIP